Parechoc Avant ARB Deluxe pour Jeep JL/JT

PARE-CHOCS DELUXE SANS BARRE CENTRALE

Inspiré du pare-chocs Deluxe classique pour la Wrangler JK, ARB a développé un pare-chocs Deluxe couvrant toute la largeur sans barre centrale et pouvant accueillir un treuil adapté à la Wrangler JL.

Fabriqué en acier pour une solidité optimale et poudré pour sa durabilité, le pare-chocs Deluxe est conçu pour améliorer le style et les systèmes de sécurité du véhicule tout en offrant une plateforme solide pour l'installation d’accessoires 4x4 indispensables de manière homogène.

Disponible pour la Jeep Wrangler JL, la pare-chocs Deluxe est compatible avec une sélection de treuils en position basse Warn, Smittybilt et Bushranger. Un cache vient se fixer sur le pare-chocs lorsqu'il n'y a pas de treuil d'installer. Des kits de feux de brouillard sont disponibles pour le pare-chocs.

CARACTÉRISTIQUES

• Design adapté au véhicule pour la Jeep Wrangler JL (y compris pour les véhicules équipés de capteurs de stationnement avant de série)
• Structure résistante en acier pour une protection maximale
• Il convient pour une utilisation avec ou sans treuil. Cache du treuil disponible séparément
• Le design des ailes permet l'installation de pneus de 37 pouces (avec la surélévation de la suspension et le déport de jante adaptés)
• Le système de fixation compatible avec l'airbag est fixé au châssis à l'aide de vis haute résistance
• Le modèle avec treuil peut accueillir une sélection de treuils électriques en position basse Warn, Magnum et Bushranger d'une capacité maximum de 10,000 lb

• Deux points de levage Hi-Lift situés sur le panneau du pare-chocs
• Emplacement pour accueillir les feux de route à LED Intensity ARB ainsi qu’une gamme de feux IPF et Bushranger
• Amortisseurs résistants en uréthane
• Deux supports d'antenne situés sur le dessus du plateau central
• Apprêt riche en zinc pour une meilleure résistance à la corrosion
• Finition poudrée texturée noir Integrit. Veuillez noter que l'assortiment de couleur n'est pas disponible pour cette finition.

Key Features

Parking Sensors
Laser cut provision is provided in the pan and
each wing for the Original Equipment ParkSense
front parking sensors. OE parking sensors have
been mapped and their performance closely
replicated when fitted to the Wrangler and
Gladiator.
• Vehicle specific design suits the Jeep Wrangler JL / Gladiator JT fitted with front parking
sensors Supplementary fitting kit 3550230 is required for fitment to Rubicon model
Durable steel construction for maximum protection
• Equally suited for winch or non-winch applications. Separate winch cover panel available
under PN 3550150
• Engineered, air bag compatible mounting system secures to the chassis via high tensile bolts
and ARB manufactured impact absorbers
• Twin jack points located in centre pan to suit ARB Jack and mechanical jacks
• Durable urethane buffers
• Two aerial brackets located on the top of the centre tube
• Will accommodate Warn, Magnum, Bushranger, Smittybilt low mount model electric winches
up to 10,000lb. Due to front parking sensors synthetic rope winches with a hawse fairlead are
recommend fitment
• Provision to accommodate ARB Intensity LED’s and a range of Bushranger and IPF lights
• Wing design allows for a 37” tyre to be fitted (suitable suspension lift and rim off set required)
• Approximate weight of the bar, chassis mounts and fitting kit is 56kg
• Zinc rich primer for additional corrosion resistance
• Finished in IntegritTM black textured powder coat

The outer side facing sensors are located
approximately 15mm higher, 11mm outward and
35mm rearward. Outer forward facing parking sensors
are located approximately 130mm higher, 40mm outward and 35mm rearward. Inner sensors are
located approximately 88mm higher, 77mm outward and 44mm rearward than the OE condition.
When fitted with larger diameter tyres these parking sensor positions and hence range may also be
affected. Further real world testing has been conducted evaluating the operation of the sensors
against such items as rubbish bins, parking bollards, wire fences, large rocks and step driveway
entrances. Test results show that sensor performance is replicated as close as practical with the
change in height of the sensors location.
Painting of parking sensors is not recommended due to the potential unknown effect on the
operation of the sensors.

Fog Lights
ARB’s Deluxe Winch Bar for the Wrangler JL and Gladiator JT
accepts the OE LED foglight in a pressed form aperture in each
wing.

Driving Light Mounts
Laser cut holes are included in the top of the centre pan for
fitment of a range of compatible driving lights such as ARB
Intensity, Bushranger and IPF 808, 800 and 900 Series Lights.
Pinning holes for ARB Intensity lights are included.

Winch Cover Panel Kit
The top pan of the Deluxe Winch Bar features provision for an optional winch cover panel PN
3550150, for when no winch is being fitted.
When fitted, the winch cover panel is recessed in the top pan to give a level and integrated
appearance. The cover is supplied in a IntegritTM textured black powder coat finish.
Antenna Mounts
Two aerial mounts are welded to the centre tube to allow fitment of UHF/AM radio, mobile phone
aerials/antennas or sand flags.
Jack Points
Each bar comes standard with two reinforced high lift jacking
points fitted to the centre pan, perfect for use with the ARB Jack.

Winch Model Fitment
Due to the centre front parking sensors, it is recommended to fit a
winch fitted with synthetic rope and a hawse fairlead. It is not
recommended to fit a winch fitted with steel cable and a roller fairlead
due to false triggering of the central parking sensors due to the added
length of the roller fairlead.
The following winches fit this ARB Deluxe Winch Bar:

• Warn M8000-S, XD9000-S, 9.5XP-S,
9.5XDC-S
• Warn ZEON 8-S, 10-S and 12-S
• Warn ZEON Platinum 10-S and 12-S
• Warn VR EVO 8-S, 10-S and 12-S
• Smittybilt Gen2 X20 10K.
• Bushranger Revo 10-S